Sewage pumps and submersible pumps from Rössle – Powerful and tough
They are indispensable during water-related operations: efficient and resistant sewage pumps and submersible pumps that easily and quickly pump out the water masses and any suspended matter they may contain.
As a supplement to the proven industrial vacuum cleaners for sludge MACH I and MACH II Rössle AG offers the electric sewage pumps and electric submersible pumps of the TERA and ROSS series presented below. The pumps can be used alone or in support of the industrial vacuum cleaners for sludge and help you to fight the masses of water even faster.
The robustly built sewage/submersible pumps of the TERA series are ideal in the fight against contaminated water due to their large grain passages. The pumps are versatile and can be used for heavy rain, burst pipes, construction site drainage and much more. The largest pump, TERA, can also be used to bridge distances. The pumps in the new ROSS series are all 230 V AC pumps. Their areas of application range from flat suction (FLAT-ROSS and B-ROSS) to pumping large quantities of water and bridging distances (B-ROSS) to bridging greater heights (C-ROSS). The C-ROSS pump is also suitable for use in the food sector.
With the sewage and submersible pumps from Rössle AG, you are optimally equipped for all water-related purposes.
Sewage / submersible pumps of the TERA series
KILO
MEGA
TERA
KILO
MEGA
GIGA
TERA
Technical data:
- Pumping capacity: 240 l/min // 14,400 l/h
- Pump power: 1,000 watt
- Voltage: 230 V 50 Hz alternating current
- Grain size pump inlet: ø 30 mm
- Weight: 9 kg
- Material: Moplen, noryl and stainless steel
- Dimensions: 26 cm x 38 cm (depth x height)
Possible application areas:
- Mobile and stationary use
- smaller quantities of water
- contaminated water
- in combination with the industrial vacuum cleaners for sludge of the MACH series
Technical data:
- Pumping capacity: 400 l/min // 24.000 l/h
- Pump power: 1,400 watt
- Voltage: 230 V 50 Hz alternating current
- Grain size pump inlet: ø 35 mm
- Weight: 12 kg
- Material: stainless steel
- Dimensions: 30 cm x 38 cm (depth x height)
Possible application areas:
- Mobile and stationary use
- smaller quantities of water
- contaminated water
- in combination with the industrial vacuum cleaners for sludge of the MACH series
Technical data:
- Pumping capacity: 1,000 l/min // 60,000 l/h
- Pump power: 4,000 watt
- Voltage: 3~ 400 V three-phase 50 Hz
- Max. delivery pressure: 2,4 bar
- Grain size pump inlet: ø 11 mm
- Weight: 50 kg
- Material: Stainless steel and chrome
- Dimensions: 24 cm x 57 cm (diameter x height)
Possible application areas:
- large water volume
- contaminated water
- Bridging greater distances
- in combination with the industrial vacuum cleaners for sludge of the MACH series
What you can count on with the submersible pumps KILO and MEGA from Rössle!
- Incl. float switch
- Connection: C-Storz coupling
- Stable and compact design
- Suitable for stationary and mobile use
- Easy transport thanks to low weight
- Maximum immersion depth of 5 m
- Cable length of 10 m
- Grain size of the pump inlet of ø 35 mm resp. ø 30 mm
- 220 V 50 Hz
- Insulation class F and protection class IP 68
The diagram shows the pumping capacity of the Rössle submersible pump MEGA in m³ per hour in relation to the pumping height.
The diagram shows the pumping capacity of the Rössle submersible pump KILO in m³ per hour in relation to the pumping height.
What you can count on with the submersible pump TERA from Rössle!
- Motor with 3~ 400 V three-phase current 50 Hz
- Connection: B-Storz coupling
- Sturdy and robust design
- Excellent for large water masses
- Maximum immersion depth of 20 m
- Cable length of 10 m
- Insulation class F and protection class IP 68
The diagram shows the pumping capacity of the Rössle submersible pump TERA in m³ per hour in relation to the pumping height.
Submersible pumps of the ROSS series
FLAT-ROSS
C-ROSS
B-ROSS
Technical data:
- Pumping capacity: 240 l/min // 14,400 l/h
- Pump power: 400 watt
- Voltage: 230 V 50 Hz alternating current
- Grain size: ø 6 mm
- Weight: 11 kg
- Material: gray iron, aluminium, stainless steel, plastic
- Dimensions: 23 cm x 32 cm (ø x height)
Possible application areas:
- Mobile and stationary use
- smaller quantities of water
- Flat suction of residual water down to a shallow water level of 1-2 mm
- in combination with the industrial vacuum cleaners for sludge of the MACH series
Technical data:
- Pumping capacity: 570 l/min // 34,200 l/h
- Pump power: 1,500 watt
- Voltage: 230 V 50 Hz alternating current
- Max. delivery pressure: 1.8 bar
- Grain size: ø 8 mm
- Weight: 19 kg
- Material: stainless steel
- Dimensions: 17 cm x 48 cm (ø x height)
Possible application areas:
- Mobile and stationary use
- for large water masses
- Pumping clean water or screened sewage water
- Bridging greater distances and heights
- Can be used in the food sector
- Suitable for a pH range from 5-8
- in combination with the industrial vacuum cleaners for sludge of the MACH series
Technical data:
- Pumping capacity: 670 l/min // 40,300 l/h
- Pump power: 1,500 watt
- Voltage: 230 V 50 Hz alternating current
- Max. delivery pressure: 1.5 bar
- Grain size: ø 9 mm
- Weight: 31 kg
- Material: gray iron, stainless steel and chrome
- Dimensions: 30 cm x 58 cm (ø x height)
Possible application areas:
- large water masses
- contaminated water with solids up to ø 9 mm
- Bridging greater distances
- Flat suction of residual water by means of attachment ring
- in combination with the industrial vacuum cleaners for sludge of the MACH series
You can count on this with the submersible pumps of the ROSS series from Rössle!
FLAT-ROSS:
- 230 V 50 HZ alternating current
- Connection: C-Storz coupling
- Stable and compact design
- For stationary and mobile use
- Effective flat suction down to a shallow water level of 1-2 mm
- Residual water extraction
- Optionally with float switch
- Maximum immersion depth of 20 m
- Cable length of 10 m
- Insulation class F and protection class IP 68
- Plug with bayonet lock IP 68
The diagram shows the pumping capacity of the Rössle submersible pump FLAT-ROSS in m³ per hour in relation to the pumping height.
C-ROSS:
- 230 V 50 HZ alternating current
- Connection: C-Storz coupling
- Sturdy and robust design
- For stationary and mobile use
- Excellent for bridging heights
- Suitable for use in the food sector
- Optionally with float switch
- Maximum immersion depth of 20 m
- Cable length of 20 m
- Insulation class F and protection class IP 68
- Plug with bayonet lock IP 68
The diagram shows the pumping capacity of the Rössle submersible pump C-ROSS in m³ per hour in relation to the pumping height.
B-ROSS:
- 230 V 50 HZ alternating current
- Connection: B-Storz coupling
- Sturdy and robust design
- Excellent for large water masses
- Flat suction possible with attachment ring
- Pumps contaminated water with solids up to ø 9 mm trouble-free
- Optionally with float switch
- Maximum immersion depth of 20 m
- Cable length of 20 m
- Insulation class F and protection class IP 68
- Plug with bayonet lock IP 68
The diagram shows the pumping capacity of the Rössle submersible pump B-ROSS in m³ per hour in relation to the pumping height.